i seperate this file from previous two. it will clearly distinguish all steps that i did.

So we have 2 fresh installed MySQL 5.6.12 with GTID enabled. Slave is marked as read_only (you can check it from slave's my.cnf)

I am going to use "mysqlreplicate" utility for creating simple 1 master->1 slave replication.

ifconfig from master server:

[root@localhost ~]# ifconfig
eth0      Link encap:Ethernet  HWaddr 20:89:84:64:22:AD  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:16 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:8 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:480 (480.0 b)  TX bytes:480 (480.0 b)

wlan0     Link encap:Ethernet  HWaddr 2C:D0:5A:3D:4E:60  
          inet addr:192.168.1.3  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::2ed0:5aff:fe3d:4e60/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:27174 errors:0 dropped:0 overruns:0 frame:0
          TX packets:25770 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:25113547 (23.9 MiB)  TX bytes:4441898 (4.2 MiB)



ifconfig from slave server:

[root@localhost mysql]# ifconfig
eth0      Link encap:Ethernet  HWaddr 08:00:27:D5:49:2C  
          inet addr:192.168.1.4  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::a00:27ff:fed5:492c/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:13411 errors:0 dropped:0 overruns:0 frame:0
          TX packets:10989 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:16602757 (15.8 MiB)  TX bytes:1156982 (1.1 MiB)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:8 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:480 (480.0 b)  TX bytes:480 (480.0 b)


And now i create a super user in slave:

mysql> create user 'remote'@'%' identified by '12345';
Query OK, 0 rows affected (0.01 sec)

mysql> grant all on *.* to 'remote'@'%';
Query OK, 0 rows affected (0.00 sec)


mysqlreplicate version:

[root@localhost ~]# mysqlreplicate --version
MySQL Utilities mysqlreplicate version 1.3.3 (part of MySQL Workbench Distribution 5.2.47)
Copyright (c) 2010, 2013 Oracle and/or its affiliates. All rights reserved.
This is a release of dual licensed MySQL Utilities. For the avoidance of
doubt, this particular copy of the software is released
under the version 2 of the GNU General Public License.
MySQL Utilities is brought to you by Oracle.


So i am starting to use mysqlreplicate from master server:

RUN number 1:

[root@localhost ~]# mysqlreplicate --master=root:12345@localhost:3306   --slave=remote:12345@192.168.1.4:3306 --rpl-user=repl:12345 -vvv
# master on localhost: ... connected.
# slave on 192.168.1.4: ... connected.
# master id = 1
#  slave id = 2
# master uuid = 8d982986-ffc3-11e2-8152-2089846422ad
#  slave uuid = dc9f26ec-ffc8-11e2-8175-080027d5492c
# Checking InnoDB statistics for type and version conflicts.
# Checking storage engines...
# Checking for binary logging on master...
# Setting up replication...
# Connecting slave to master...
# CHANGE MASTER TO MASTER_HOST = 'localhost', MASTER_USER = 'repl', MASTER_PASSWORD = '12345', MASTER_PORT = 3306, MASTER_AUTO_POSITION=1
# Starting slave from master's last position...
# IO status: Connecting to master
# IO thread running: Connecting
# IO error: 1040:error connecting to master 'repl@localhost:3306' - retry-time: 60  retries: 1
# SQL thread running: Yes
# SQL error: None
# Waiting for slave to synchronize with master
# IO status: Connecting to master
# IO thread running: Connecting
# IO error: 1040:error connecting to master 'repl@localhost:3306' - retry-time: 60  retries: 1
# SQL thread running: Yes
# SQL error: None
# Waiting for slave to synchronize with master
# IO status: Connecting to master
# IO thread running: Connecting
# IO error: 1040:error connecting to master 'repl@localhost:3306' - retry-time: 60  retries: 1
# SQL thread running: Yes
# SQL error: None
# Waiting for slave to synchronize with master
# IO status: Connecting to master
# IO thread running: Connecting
# IO error: 1040:error connecting to master 'repl@localhost:3306' - retry-time: 60  retries: 1
# SQL thread running: Yes
# SQL error: None
# Waiting for slave to synchronize with master
# IO status: Connecting to master
# IO thread running: Connecting
# IO error: 1040:error connecting to master 'repl@localhost:3306' - retry-time: 60  retries: 1
# SQL thread running: Yes
# SQL error: None
# Waiting for slave to synchronize with master
# IO status: Connecting to master
# IO thread running: Connecting
# IO error: 1040:error connecting to master 'repl@localhost:3306' - retry-time: 60  retries: 1
# SQL thread running: Yes
# SQL error: None
# Waiting for slave to synchronize with master
# IO status: Connecting to master
# IO thread running: Connecting
# IO error: 1040:error connecting to master 'repl@localhost:3306' - retry-time: 60  retries: 1
# SQL thread running: Yes
# SQL error: None
# Waiting for slave to synchronize with master
# IO status: Connecting to master
# IO thread running: Connecting
# IO error: 1040:error connecting to master 'repl@localhost:3306' - retry-time: 60  retries: 1
# SQL thread running: Yes
# SQL error: None
# Waiting for slave to synchronize with master
# IO status: Connecting to master
# IO thread running: Connecting
# IO error: 1040:error connecting to master 'repl@localhost:3306' - retry-time: 60  retries: 1
# SQL thread running: Yes
# SQL error: None
# Waiting for slave to synchronize with master
# IO status: Connecting to master
# IO thread running: Connecting
# IO error: 1040:error connecting to master 'repl@localhost:3306' - retry-time: 60  retries: 1
# SQL thread running: Yes
# SQL error: None
# Waiting for slave to synchronize with master
ERROR: failed to synch slave with master.
ERROR: Cannot setup replication.

RUN number 2:
[root@localhost ~]# mysqlreplicate --master=root:12345@localhost:3306   --slave=remote:12345@192.168.1.4:3306 --rpl-user=repl:12345 -vvv
RUN number 3:
[root@localhost ~]# mysqlreplicate --master=root:12345@localhost:3306   --slave=remote:12345@192.168.1.4:3306 --rpl-user=repl:12345 -vvv




After this here is information from SLAVE:

mysql> show master status\G
*************************** 1. row ***************************
             File: mysql-bin.000001
         Position: 528
     Binlog_Do_DB: 
 Binlog_Ignore_DB: 
Executed_Gtid_Set: dc9f26ec-ffc8-11e2-8175-080027d5492c:1-2
1 row in set (0.00 sec)




mysql> show slave status\G
*************************** 1. row ***************************
               Slave_IO_State: Connecting to master
                  Master_Host: localhost
                  Master_User: repl
                  Master_Port: 3306
                Connect_Retry: 60
              Master_Log_File: 
          Read_Master_Log_Pos: 4
               Relay_Log_File: mysql-relay-bin.000001
                Relay_Log_Pos: 4
        Relay_Master_Log_File: 
             Slave_IO_Running: Connecting
            Slave_SQL_Running: Yes
              Replicate_Do_DB: 
          Replicate_Ignore_DB: 
           Replicate_Do_Table: 
       Replicate_Ignore_Table: 
      Replicate_Wild_Do_Table: 
  Replicate_Wild_Ignore_Table: 
                   Last_Errno: 0
                   Last_Error: 
                 Skip_Counter: 0
          Exec_Master_Log_Pos: 0
              Relay_Log_Space: 151
              Until_Condition: None
               Until_Log_File: 
                Until_Log_Pos: 0
           Master_SSL_Allowed: No
           Master_SSL_CA_File: 
           Master_SSL_CA_Path: 
              Master_SSL_Cert: 
            Master_SSL_Cipher: 
               Master_SSL_Key: 
        Seconds_Behind_Master: 0
Master_SSL_Verify_Server_Cert: No
                Last_IO_Errno: 1045
                Last_IO_Error: error connecting to master 'repl@localhost:3306' - retry-time: 60  retries: 3
               Last_SQL_Errno: 0
               Last_SQL_Error: 
  Replicate_Ignore_Server_Ids: 
             Master_Server_Id: 0
                  Master_UUID: 
             Master_Info_File: mysql.slave_master_info
                    SQL_Delay: 0
          SQL_Remaining_Delay: NULL
      Slave_SQL_Running_State: Slave has read all relay log; waiting for the slave I/O thread to update it
           Master_Retry_Count: 86400
                  Master_Bind: 
      Last_IO_Error_Timestamp: 130808 07:16:42
     Last_SQL_Error_Timestamp: 
               Master_SSL_Crl: 
           Master_SSL_Crlpath: 
           Retrieved_Gtid_Set: 
            Executed_Gtid_Set: dc9f26ec-ffc8-11e2-8175-080027d5492c:1-2
                Auto_Position: 1
1 row in set (0.00 sec)



mysql> show binary logs;
+------------------+-----------+
| Log_name         | File_size |
+------------------+-----------+
| mysql-bin.000001 |       528 |
+------------------+-----------+
1 row in set (0.00 sec)


Here is information from MASTER:

mysql> show master status\G
*************************** 1. row ***************************
             File: mysql-bin.000001
         Position: 1254
     Binlog_Do_DB: 
 Binlog_Ignore_DB: 
Executed_Gtid_Set: 8d982986-ffc3-11e2-8152-2089846422ad:1-5
1 row in set (0.00 sec)



mysql> show binary logs;
+------------------+-----------+
| Log_name         | File_size |
+------------------+-----------+
| mysql-bin.000001 |      1254 |
+------------------+-----------+
1 row in set (0.00 sec)


mysql> show slave hosts;
Empty set (0.00 sec)


As i understand replication did not setup correctly and no slave is not connected.
master->slave replication does not functional at moment.


Now i decide to to restart both of servers. firstly i begin from master:

[root@localhost ~]# service mysql restart
Shutting down MySQL..                                      [  OK  ]
Starting MySQL..                                           [  OK  ]


And then restarted SLAVE:
[root@localhost ~]# service mysql restart
Shutting down MySQL.. SUCCESS! 
Starting MySQL.. ERROR! The server quit without updating PID file (/var/lib/mysql/localhost.localdomain.pid).

So SLAVE not restarted. i will attach error logs from master and slave too.



 


