=== modified file 'mysql-test/suite/parts/inc/partition_check_drop.inc'
--- mysql-test/suite/parts/inc/partition_check_drop.inc	2008-08-04 05:04:47 +0000
+++ mysql-test/suite/parts/inc/partition_check_drop.inc	2011-01-11 14:41:18 +0000
@@ -66,10 +66,10 @@
    }
    # Do a manual cleanup, because the following tests should not suffer from
    # remaining files
-   --exec rm -f $MYSQLD_DATADIR/test/t1* || true
+   --remove_files_wildcard $MYSQLD_DATADIR/test t1*
    if ($with_directories)
    {
-	   --exec rm -f $MYSQLTEST_VARDIR/tmp/t1* || true
+           --remove_files_wildcard $MYSQLTEST_VARDIR/tmp t1*
    }
 }
 --enable_query_log

=== modified file 'mysql-test/suite/parts/inc/partition_layout_check1.inc'
--- mysql-test/suite/parts/inc/partition_layout_check1.inc	2009-02-01 12:00:48 +0000
+++ mysql-test/suite/parts/inc/partition_layout_check1.inc	2011-01-11 14:41:18 +0000
@@ -29,14 +29,10 @@
 let $MYSQLD_DATADIR= `select LEFT(@@datadir, LENGTH(@@datadir)-1)`;
 #echo MYSQLD_DATADIR: $MYSQLD_DATADIR;
 
-# Dump the current definition of the table t1 to tmp1
-# This complicated method - let another mysqltest collect the output - is used
-# because of two reasons
+# Save the current definition of the table t1
 # - SHOW CREATE TABLE t1 is at least currently most probably more reliable than
 #   the corresponding SELECT on the INFORMATION_SCHEMA
-# - SHOW CREATE TABLE .. cannot write its out put into a file like SELECT
-let $show_file= $MYSQLD_DATADIR/test/tmp1;
---exec echo "SHOW CREATE TABLE t1; exit; " | $MYSQL_TEST > $show_file 2>&1
+let $show_create= `SHOW CREATE TABLE t1`;
 if ($do_file_tests)
 {
   # List the files belonging to the table t1
@@ -57,12 +53,13 @@
 
 # Insert the current definition of the table t1 into t0_definition
 eval INSERT INTO t0_definition SET state = 'old',
-     create_command = load_file('$show_file'),
+     create_command = "$show_create",
      file_list      = @aux;
 
 # Print the create table statement into the protocol
+# Added the concat to avoid changing the result files
 --replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR '\r' ''
-SELECT create_command FROM t0_definition WHERE state = 'old';
+SELECT concat('SHOW CREATE TABLE t1;\nTable\tCreate Table\n',create_command,'\n') as `create_command` FROM t0_definition WHERE state = 'old';
 if ($do_file_tests)
 {
    # We stored the list of files, therefore printing the content makes sense

=== modified file 'mysql-test/suite/parts/inc/partition_layout_check2.inc'
--- mysql-test/suite/parts/inc/partition_layout_check2.inc	2009-02-01 12:00:48 +0000
+++ mysql-test/suite/parts/inc/partition_layout_check2.inc	2011-01-11 14:41:18 +0000
@@ -28,9 +28,8 @@
 let $MYSQLD_DATADIR= `select LEFT(@@datadir, LENGTH(@@datadir)-1)`;
 #echo MYSQLD_DATADIR: $MYSQLD_DATADIR;
 
-# Dump the current definition of the table t1 to tmp1
-let $show_file= $MYSQLD_DATADIR/test/tmp1;
---exec echo "SHOW CREATE TABLE t1; exit; " | $MYSQL_TEST > $show_file 2>&1
+# Save the current definition of the table t1
+let $show_create= `SHOW CREATE TABLE t1`;
 
 if ($do_file_tests)
 {
@@ -52,7 +51,7 @@
 
 # Insert the current definition of the table t1 into t0_definition
 eval INSERT INTO t0_definition SET state = 'new',
-     create_command = load_file('$show_file'),
+     create_command = "$show_create",
      file_list      = @aux;
 
 # Print the old and new table layout, if they differ

=== modified file 'mysql-test/suite/parts/r/partition_recover_myisam.result'
--- mysql-test/suite/parts/r/partition_recover_myisam.result	2009-08-29 21:29:47 +0000
+++ mysql-test/suite/parts/r/partition_recover_myisam.result	2011-01-11 14:41:18 +0000
@@ -1,4 +1,4 @@
-call mtr.add_suppression("./test/t1_will_crash");
+call mtr.add_suppression("t1_will_crash");
 call mtr.add_suppression("Got an error from unknown thread, ha_myisam.cc");
 CREATE TABLE t1_will_crash (a INT, KEY (a)) ENGINE=MyISAM;
 INSERT INTO t1_will_crash VALUES (1), (2), (3), (4), (5), (6), (7), (8), (9), (10), (11);

=== modified file 'mysql-test/suite/parts/t/partition_recover_myisam.test'
--- mysql-test/suite/parts/t/partition_recover_myisam.test	2009-08-29 21:29:47 +0000
+++ mysql-test/suite/parts/t/partition_recover_myisam.test	2011-01-11 14:41:18 +0000
@@ -1,6 +1,6 @@
 # test the auto-recover (--myisam-recover) of partitioned myisam tables
 
-call mtr.add_suppression("./test/t1_will_crash");
+call mtr.add_suppression("t1_will_crash");
 call mtr.add_suppression("Got an error from unknown thread, ha_myisam.cc");
 
 --source include/have_partition.inc
@@ -20,6 +20,8 @@
 let $MYSQLD_DATADIR= `select @@datadir`;
 --remove_file $MYSQLD_DATADIR/test/t1_will_crash.MYI
 --copy_file std_data/corrupt_t1.MYI $MYSQLD_DATADIR/test/t1_will_crash.MYI
+--replace_result \\ /
+--replace_regex /Table '.*data/Table './
 SELECT * FROM t1_will_crash;
 DROP TABLE t1_will_crash;
 CREATE TABLE t1_will_crash (a INT, KEY (a))
@@ -33,5 +35,7 @@
 --echo # head -c1024 t1#P#p1.MYI > corrupt_t1#P#p1.MYI 
 --remove_file $MYSQLD_DATADIR/test/t1_will_crash#P#p1.MYI
 --copy_file std_data/corrupt_t1#P#p1.MYI $MYSQLD_DATADIR/test/t1_will_crash#P#p1.MYI
+--replace_result \\ /
+--replace_regex /Table '.*data/Table './
 SELECT * FROM t1_will_crash;
 DROP TABLE t1_will_crash;

=== modified file 'mysql-test/suite/parts/t/partition_special_innodb.test'
--- mysql-test/suite/parts/t/partition_special_innodb.test	2008-12-04 09:47:25 +0000
+++ mysql-test/suite/parts/t/partition_special_innodb.test	2011-01-11 14:41:18 +0000
@@ -58,8 +58,8 @@
 PARTITION BY HASH (a)
 PARTITIONS 2;
 
-connect (con1,127.0.0.1,root,,test,$MASTER_MYPORT,);
-connect (con2,127.0.0.1,root,,test,$MASTER_MYPORT,);
+connect (con1, localhost, root,,);
+connect (con2, localhost, root,,);
 
 --connection con1
 SET autocommit=OFF;