| Bug #639 | Unknown Crash in mysqld_safe | ||
|---|---|---|---|
| Submitted: | 11 Jun 2003 14:54 | Modified: | 2 Aug 2003 7:22 |
| Reporter: | Richard Gabriel | Email Updates: | |
| Status: | No Feedback | Impact on me: | |
| Category: | MySQL Server | Severity: | S1 (Critical) |
| Version: | 4.0.13-Max | OS: | Linux (RedHat Linux 7.1) |
| Assigned to: | CPU Architecture: | Any | |
[11 Jun 2003 14:54]
Richard Gabriel
[11 Jun 2003 15:00]
Richard Gabriel
Oh, I am using the Max version of MySQL
[11 Jun 2003 15:52]
Thomas Seifert
I'm having the same problem. Nearly every week I've got a crash like that. Installed 4.0.13 RPMS on RedHat-7.1. Worked without problems (only crashes in Raid-Code ;-) http://bugs.mysql.com/bug.php?id=346) with 4.0.12. And no, I've got no corrupted tables BEFORE the crash. Here are some stack-traces from the last crashes. Damned that they aren't fully completed, it always fails somewhere ... . mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=402653184 read_buffer_size=2093056 sort_buffer_size=2097144 max_used_connections=62 max_connections=200 threads_connected=4 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 1211614 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=0x5f00ce60 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0x5e41c6d8, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x80d6e8a 0x4003ea65 0x8367132 0x8366cfb 0x812c5eb 0x812aeca 0x8105bbe 0x80fc73a 0x810919d 0x80e1b8a 0x80e55cb 0x80e0cbd 0x80e6aee 0x80dfe8f 0x4003bc3f 0x401abb2a New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://www.mysql.com/doc/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it Trying to get some variables. Some pointers may be invalid and cause the dump to abort... thd->query at 0x8796c68 = SELECT thread, modifystamp, sum(viewcount) as viewcount FROM phorum_XXXXX WHERE approved='Y' GROUP BY thread, modifystamp ORDER BY modifystamp desc, thread desc limit 25 thd->thread_id=404021 Successfully dumped variables, if you ran with --log, take a look at the details of what thread 404021 did to cause the crash. In some cases of really bad corruption, the values shown above may be invalid. The manual page at http://www.mysql.com/doc/C/r/Crashing.html contains information that should help you find out what is causing the crash. ------------- mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=402653184 read_buffer_size=2093056 sort_buffer_size=2097144 max_used_connections=37 Fatal signal 4 while backtracing max_connections=200 threads_connected=4 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 1211614 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=0x8815798 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0x5e260d78, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x80d6e8a 0x4003ea65 0x838ca99 0x810919d 0x80e1b8a 0x80e55cb 0x80e0cbd 0x80e6aee 0x80dfe8f 0x4003bc3f 0x401abb2a New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://www.mysql.com/doc/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it Trying to get some variables. Some pointers may be invalid and cause the dump to abort... thd->query at 0x5e1278b0 is invalid pointer thd->thread_id=460709 Successfully dumped variables, if you ran with --log, take a look at the details of what thread 460709 did to cause the crash. In some cases of really bad corruption, the values shown above may be invalid. The manual page at http://www.mysql.com/doc/C/r/Crashing.html contains information that should help you find out what is causing the crash. ------------- I would really appreciate any ideas on this. BTW, its a DUAL Athlon MP2000+ with 2GB Ram. Running latest RedHat-Errata's on Kernel-2.4.19-XFS with MySQL-databases running on an XFS-filesystem. TIA, Thomas
[2 Jul 2003 7:22]
MySQL Verification Team
Thank you all for this bug report. In order to help us fix a bug, we need a repeatable test case. A repeatable test case consists of a set of SQL commands that would always lead to a bug. In the case that tables are large, it is ok to upload them and send a set of SQL commands, which when executed on those tables will always lead to a bug.
[21 Jul 2004 4:34]
red shi
Hi: I downloaded mysql-4.0.20 source and compiled it. When I started mysqld_safe, it was crashed every time. My operation serials: user mysql and group mysql was created before! mysql linux kernel version is 2.4.18 ./configure --prefix=/usr/local/mysql make;make install cd /usr/local/mysql;chown -R mysql.mysql . ./mysql_install_db --user=mysql ./mysqld_safe --user=mysql & and the error message file: 040721 10:04:32 mysqld started InnoDB: The first specified data file ./ibdata1 did not exist: InnoDB: a new database to be created! 040721 10:04:32 InnoDB: Setting file ./ibdata1 size to 10 MB InnoDB: Database physically writes the file full: wait... 040721 10:04:36 InnoDB: Log file ./ib_logfile0 did not exist: new to be created InnoDB: Setting log file ./ib_logfile0 size to 5 MB InnoDB: Database physically writes the file full: wait... 040721 10:04:38 InnoDB: Log file ./ib_logfile1 did not exist: new to be created InnoDB: Setting log file ./ib_logfile1 size to 5 MB InnoDB: Database physically writes the file full: wait... InnoDB: Doublewrite buffer not found: creating new InnoDB: Doublewrite buffer created InnoDB: Creating foreign key constraint system tables InnoDB: Foreign key constraint system tables created 040721 10:04:41 InnoDB: Started 040721 10:04:41 Fatal error: Can't open privilege tables: Can't find file: './mysql/host.frm' (errno: 13) 040721 10:04:41 Aborting 040721 10:04:41 InnoDB: Starting shutdown... 040721 10:04:44 InnoDB: Shutdown completed 040721 10:04:44 /usr/local/mysql/libexec/mysqld: Shutdown Complete 040721 10:04:44 mysqld ended 040721 10:05:56 mysqld started 040721 10:05:56 InnoDB: Started mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8388600 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 225791 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffff268, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x80daa2f 0x40037144 0x82a6fc4 0x82a6c9f 0x80de09a 0x80dbe32 0x4011817d 0x80a0541 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://www.mysql.com/doc/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. Number of processes running now: 0 040721 10:05:56 mysqld restarted 040721 10:05:56 InnoDB: Started mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8388600 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 225791 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffff268, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x80daa2f 0x40037144 0x82a6fc4 0x82a6c9f 0x80de09a 0x80dbe32 0x4011817d 0x80a0541 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://www.mysql.com/doc/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. Number of processes running now: 0 040721 10:05:56 mysqld restarted 040721 10:05:56 InnoDB: Started mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8388600 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 225791 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffff268, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x80daa2f 0x40037144 0x82a6fc4 0x82a6c9f 0x80de09a 0x80dbe32 0x4011817d 0x80a0541 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://www.mysql.com/doc/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. Number of processes running now: 0 040721 10:05:56 mysqld restarted 040721 10:05:56 InnoDB: Started mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8388600 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 225791 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffff268, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x80daa2f 0x40037144 0x82a6fc4 0x82a6c9f 0x80de09a 0x80dbe32 0x4011817d 0x80a0541 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://www.mysql.com/doc/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. Number of processes running now: 0 040721 10:05:56 mysqld restarted 040721 10:05:56 InnoDB: Started mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8388600 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 225791 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffff268, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x80daa2f 0x40037144 0x82a6fc4 0x82a6c9f 0x80de09a 0x80dbe32 0x4011817d 0x80a0541 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://www.mysql.com/doc/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. Number of processes running now: 0 040721 10:05:56 mysqld restarted 040721 10:05:57 InnoDB: Started mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8388600 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 225791 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffff268, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x80daa2f 0x40037144 0x82a6fc4 0x82a6c9f 0x80de09a 0x80dbe32 0x4011817d 0x80a0541 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://www.mysql.com/doc/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. Number of processes running now: 0 040721 10:05:57 mysqld restarted 040721 10:05:57 InnoDB: Started mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8388600 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 225791 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffff268, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x80daa2f 0x40037144 0x82a6fc4 0x82a6c9f 0x80de09a 0x80dbe32 0x4011817d 0x80a0541 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://www.mysql.com/doc/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. Number of processes running now: 0 040721 10:05:57 mysqld restarted 040721 10:05:57 InnoDB: Started mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8388600 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 225791 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffff268, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x80daa2f 0x40037144 0x82a6fc4 0x82a6c9f 0x80de09a 0x80dbe32 0x4011817d 0x80a0541 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://www.mysql.com/doc/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. Number of processes running now: 0 040721 10:05:57 mysqld restarted 040721 10:05:57 InnoDB: Started mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8388600 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 225791 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffff268, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x80daa2f 0x40037144 0x82a6fc4 0x82a6c9f 0x80de09a 0x80dbe32 0x4011817d 0x80a0541 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://www.mysql.com/doc/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. Number of processes running now: 0 040721 10:05:57 mysqld restarted 040721 10:05:57 InnoDB: Started mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8388600 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 225791 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffff268, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x80daa2f 0x40037144 0x82a6fc4 0x82a6c9f 0x80de09a 0x80dbe32 0x4011817d 0x80a0541 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://www.mysql.com/doc/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. Number of processes running now: 0 040721 10:05:57 mysqld restarted 040721 10:05:57 InnoDB: Started mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8388600 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 225791 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffff268, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x80daa2f 0x40037144 0x82a6fc4 0x82a6c9f 0x80de09a 0x80dbe32 0x4011817d 0x80a0541 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://www.mysql.com/doc/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. Number of processes running now: 0 040721 10:05:57 mysqld restarted 040721 10:05:57 InnoDB: Started mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8388600 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 225791 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffff268, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x80daa2f 0x40037144 0x82a6fc4 0x82a6c9f 0x80de09a 0x80dbe32 0x4011817d 0x80a0541 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://www.mysql.com/doc/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. Number of processes running now: 0 040721 10:05:57 mysqld restarted 040721 10:05:58 InnoDB: Started mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8388600 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 225791 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffff268, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x80daa2f 0x40037144 0x82a6fc4 0x82a6c9f 0x80de09a 0x80dbe32 0x4011817d 0x80a0541 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://www.mysql.com/doc/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. Number of processes running now: 0 040721 10:05:58 mysqld restarted 040721 10:05:58 InnoDB: Started mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8388600 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 225791 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffff268, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x80daa2f 0x40037144 0x82a6fc4 0x82a6c9f 0x80de09a 0x80dbe32 0x4011817d 0x80a0541 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://www.mysql.com/doc/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. Number of processes running now: 0 040721 10:05:58 mysqld restarted 040721 10:05:58 InnoDB: Started mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8388600 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 225791 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffff268, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x80daa2f 0x40037144 0x82a6fc4 0x82a6c9f 0x80de09a 0x80dbe32 0x4011817d 0x80a0541 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://www.mysql.com/doc/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. Number of processes running now: 0 040721 10:05:58 mysqld restarted 040721 10:05:58 InnoDB: Started mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8388600 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 225791 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffff268, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x80daa2f 0x40037144 0x82a6fc4 0x82a6c9f 0x80de09a 0x80dbe32 0x4011817d 0x80a0541 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://www.mysql.com/doc/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. Number of processes running now: 0 040721 10:05:58 mysqld restarted 040721 10:05:58 InnoDB: Started mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8388600 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 225791 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffff268, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x80daa2f 0x40037144 0x82a6fc4 0x82a6c9f 0x80de09a 0x80dbe32 0x4011817d 0x80a0541 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://www.mysql.com/doc/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. Number of processes running now: 0 040721 10:05:58 mysqld restarted 040721 10:05:58 InnoDB: Started mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8388600 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 225791 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffff268, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x80daa2f 0x40037144 0x82a6fc4 0x82a6c9f 0x80de09a 0x80dbe32 0x4011817d 0x80a0541 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://www.mysql.com/doc/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. Number of processes running now: 0 040721 10:05:58 mysqld restarted 040721 10:05:58 InnoDB: Started mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8388600 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 225791 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffff268, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x80daa2f 0x40037144 0x82a6fc4 0x82a6c9f 0x80de09a 0x80dbe32 0x4011817d 0x80a0541 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://www.mysql.com/doc/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. Number of processes running now: 0 040721 10:05:58 mysqld restarted 040721 10:05:58 InnoDB: Started mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8388600 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 225791 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffff268, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x80daa2f 0x40037144 0x82a6fc4 0x82a6c9f 0x80de09a 0x80dbe32 0x4011817d 0x80a0541 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://www.mysql.com/doc/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. Number of processes running now: 0 040721 10:05:59 mysqld restarted 040721 10:05:59 InnoDB: Started mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8388600 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 225791 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffff268, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x80daa2f 0x40037144 0x82a6fc4 0x82a6c9f 0x80de09a 0x80dbe32 0x4011817d 0x80a0541 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://www.mysql.com/doc/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. Number of processes running now: 0 040721 10:05:59 mysqld restarted 040721 10:05:59 InnoDB: Started mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8388600 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 225791 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffff268, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x80daa2f 0x40037144 0x82a6fc4 0x82a6c9f 0x80de09a 0x80dbe32 0x4011817d 0x80a0541 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://www.mysql.com/doc/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. Number of processes running now: 0 040721 10:05:59 mysqld restarted 040721 10:05:59 InnoDB: Started mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8388600 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 225791 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffff268, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x80daa2f 0x40037144 0x82a6fc4 0x82a6c9f 0x80de09a 0x80dbe32 0x4011817d 0x80a0541 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://www.mysql.com/doc/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. Number of processes running now: 0 040721 10:05:59 mysqld restarted 040721 10:05:59 InnoDB: Started mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8388600 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 225791 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffff268, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x80daa2f 0x40037144 0x82a6fc4 0x82a6c9f 0x80de09a 0x80dbe32 0x4011817d 0x80a0541 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://www.mysql.com/doc/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. Number of processes running now: 0 040721 10:05:59 mysqld restarted 040721 10:05:59 InnoDB: Started mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8388600 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 225791 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffff268, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x80daa2f 0x40037144 0x82a6fc4 0x82a6c9f 0x80de09a 0x80dbe32 0x4011817d 0x80a0541 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://www.mysql.com/doc/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. Number of processes running now: 0 040721 10:05:59 mysqld restarted 040721 10:05:59 InnoDB: Started mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8388600 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 225791 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffff268, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x80daa2f 0x40037144 0x82a6fc4 0x82a6c9f 0x80de09a 0x80dbe32 0x4011817d 0x80a0541 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://www.mysql.com/doc/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. Number of processes running now: 0 040721 10:05:59 mysqld restarted 040721 10:05:59 InnoDB: Started mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8388600 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 225791 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffff268, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x80daa2f 0x40037144 0x82a6fc4 0x82a6c9f 0x80de09a 0x80dbe32 0x4011817d 0x80a0541 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://www.mysql.com/doc/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. Number of processes running now: 0 040721 10:05:59 mysqld restarted 040721 10:06:00 InnoDB: Started mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8388600 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 225791 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffff268, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x80daa2f 0x40037144 0x82a6fc4 0x82a6c9f 0x80de09a 0x80dbe32 0x4011817d 0x80a0541 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://www.mysql.com/doc/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. Number of processes running now: 0 040721 10:06:00 mysqld restarted 040721 10:06:00 InnoDB: Started mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8388600 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 225791 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffff268, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x80daa2f 0x40037144 0x82a6fc4 0x82a6c9f 0x80de09a 0x80dbe32 0x4011817d 0x80a0541 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://www.mysql.com/doc/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. Number of processes running now: 0 040721 10:06:00 mysqld restarted 040721 10:06:00 InnoDB: Started mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8388600 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 225791 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffff268, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x80daa2f 0x40037144 0x82a6fc4 0x82a6c9f 0x80de09a 0x80dbe32 0x4011817d 0x80a0541 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://www.mysql.com/doc/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. Number of processes running now: 0 040721 10:06:00 mysqld restarted 040721 10:06:00 InnoDB: Started mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8388600 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 225791 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffff268, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x80daa2f 0x40037144 0x82a6fc4 0x82a6c9f 0x80de09a 0x80dbe32 0x4011817d 0x80a0541 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://www.mysql.com/doc/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. Number of processes running now: 0 040721 10:06:00 mysqld restarted 040721 10:06:00 InnoDB: Started mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8388600 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 225791 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffff268, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x80daa2f 0x40037144 0x82a6fc4 0x82a6c9f 0x80de09a 0x80dbe32 0x4011817d 0x80a0541 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://www.mysql.com/doc/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. Number of processes running now: 0 040721 10:06:00 mysqld restarted 040721 10:06:00 InnoDB: Started mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8388600 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 225791 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffff268, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x80daa2f 0x40037144 0x82a6fc4 0x82a6c9f 0x80de09a 0x80dbe32 0x4011817d 0x80a0541 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://www.mysql.com/doc/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. Number of processes running now: 0 040721 10:06:00 mysqld restarted 040721 10:06:00 InnoDB: Started mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8388600 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 225791 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffff268, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x80daa2f 0x40037144 0x82a6fc4 0x82a6c9f 0x80de09a 0x80dbe32 0x4011817d 0x80a0541 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://www.mysql.com/doc/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. Number of processes running now: 0 040721 10:06:00 mysqld restarted 040721 10:06:00 InnoDB: Started mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8388600 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 225791 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffff268, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x80daa2f 0x40037144 0x82a6fc4 0x82a6c9f 0x80de09a 0x80dbe32 0x4011817d 0x80a0541 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://www.mysql.com/doc/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. Number of processes running now: 0 040721 10:06:01 mysqld restarted 040721 10:06:01 InnoDB: Started mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8388600 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 225791 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffff268, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x80daa2f 0x40037144 0x82a6fc4 0x82a6c9f 0x80de09a 0x80dbe32 0x4011817d 0x80a0541 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://www.mysql.com/doc/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. Number of processes running now: 0 040721 10:06:01 mysqld restarted 040721 10:06:01 InnoDB: Started mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8388600 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 225791 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffff268, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x80daa2f 0x40037144 0x82a6fc4 0x82a6c9f 0x80de09a 0x80dbe32 0x4011817d 0x80a0541 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://www.mysql.com/doc/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. Number of processes running now: 0 040721 10:06:01 mysqld restarted 040721 10:06:01 InnoDB: Started mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8388600 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 225791 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffff268, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x80daa2f 0x40037144 0x82a6fc4 0x82a6c9f 0x80de09a 0x80dbe32 0x4011817d 0x80a0541 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://www.mysql.com/doc/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. Number of processes running now: 0 040721 10:06:01 mysqld
[14 Feb 2005 22:54]
Bugs System
No feedback was provided for this bug for over a month, so it is being suspended automatically. If you are able to provide the information that was originally requested, please do so and change the status of the bug back to "Open".
